Home :: FSP Power Supply :: Lenovo 54Y8907 Power Supply

For Lenovo 54Y8907 850W Power Supply

850W 54Y8907 FSP850-0AWSE Power Supply For Lenovo P500 P700 P710. enjoys 6 Months Warranty,30-Day Money Back!

Lenovo 54Y8907 Power Supply

For Lenovo 54Y8907 Switching Power Supply 54Y8907.All power supplies are tested by our in house technicians and they are guaranteed to function properly.

  • Part Number: 54Y8907
  • For P500 P700 P710
  • Wattage: 850W
  • Condition:
    Refurbished,Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For HP
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.

850W 54Y8907 80Plus Platinum Power Supply for P500 P510 P700 P710 WorkStation

Max Power: 850W
Dimensions: 162mm x 97mm x 135mm
Connectors
(1) 14-Pin Hot Pluggable
Part Number 54Y8907
Model Number FSP850-OAWSE
Max Power 850W
Input 100-240V~13-6A, 50-60Hz
Application Lenovo Workstation P700 P710


HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new Lenovo 54Y8907 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.