Home :: Delta Power Supply :: HP TDPS-650BB B Power Supply

HP 407730-001 650W Power Supply For HP ProLiant ML150 G5 Server

For HP 407730-001 POWER SUPPLY 461512-001 459558-001 ML150 G5,The power supply was pulled from a tested HP desktop. The power supply is in good physical condition, enjoys 6 Months Warranty,30-Day Money Back!

HP 407730-001 Power Supply

TDPS-650BB-B 407730-001 HP 650-Watts Power Supply for ProLiant ML150 G5 Server.

  • Part Number: 407730-001
  • For HP ML150 G5 Server
  • Wattage: 650W
  • Condition:
    Refurbished, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Refurbished, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For HP
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.

HP Proliant ML150 G5 ML150 G3 Server Power Supply PSU 650W TDPS-650BB B 407730-001 402075-001 459558-001 461512-001
Type: Power Supply
Spare: 407730-001
Model: TDPS-650BB B
Power: 650 WATT
Fan: 1x FAN
For: ML150

Compatible HP model
ML150 G3
ML150 G5

Compatible Part No
407730-001
402075-001
459558-001
461512-001

Compatible Model No
TDPS-2650BB B



HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new HP 407730-001 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.