Home :: For Dell Power Supply :: For Dell L200EPS-01 Power Supply

Brand new For Dell L200EPS-01 200W Power Supply for Dell Optiplex 7080 SFF

For Dell 200W Power Supply Unit HJ34C 0HJ34C L200EPS-01 6+4+4 Pin. enjoys 6 Months Warranty,30-Day Money Back!

For Dell L200EPS-01 Power Supply

Brand new Dell Optiplex 7080 SFF 200W Power Supply L200EPS-01 HJ34C.All power supplies are tested by our in house technicians and they are guaranteed to function properly.

  • Part Number: L200EPS-01
  • Max Power: 200W Main
  • Model: For Dell Optiplex 7080 SFF
  • Wattage: 200 WATT
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For Dell
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
MAX. OUTPUT POWER: 200W
AC Input:
100-240V ~ 3.2a / 50-60hz
DC Output:
+12V1DC ⎓ 16.5a
+12V2DC ⎓ 16.5a
+12VBDC ⎓ 14a
200W
Connector Type 6-pin + 4-pin + 4-pin proprietary Dell SFF connector
Dimension 200 x 82 x 62 mm (estimated based on SFF PSU standard)
Weight 1.2 kg (estimated)

Part Number: HJ34C / L200EPS-01 / 0HJ34C
Applicable Models:
Dell Optiplex 7080 SFF


HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new dell L200EPS-01 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.