Home :: Fujitsu Power Supply :: Fujitsu S26113-E567-V50-02 Power Supply

S26113-E567-V50-02 500W Power Supply For Fujitsu W530

S26113-E567-V50-02 500W Power Supply For Fujitsu W530 DPS-500XB A, enjoys 6 Months Warranty,30-Day Money Back!

Fujitsu S26113-E567-V50-02 Power Supply

Fujitsu S26113-E567-V50-02 500Watt Power Supply for Fujitsu CELSIUS M720, M730. All power supplies are tested by our in house technicians and they are guaranteed to function properly.

  • Model: S26113-E567-V50-02
  • For Fujitsu CELSIUS W520, W530
  • Wattage: 500 WATT
  • Condition:
    Refurbished, Tested, Working Good
Our Price : AU$
  • Qty:
  • Availability: In stock
  • Condition: Refurbished,Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For Fujitsu
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
S26113-E567-V50-02 500W Power Supply For Fujitsu W530 DPS-500XB A

AC Input:
100V-240V~
7A-3.5A
50Hz-60Hz
DC Output:
+12V1 17A
+12V2 17A
+12V3 15A
+12V4 15A
+12V5 17A
Aux DC Output:
+11V 2A 500W
Part Number: S26113-E567-V50-02
Model DPS-500XB A
Power 500W
Compatible for Fujitsu CELSIUS M720, M730, Fujitsu CELSIUS W520, W530


HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the Fujitsu S26113-E567-V50-02 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.