Home :: Dell Power Supply :: Dell YCRD7 Power Supply

Brand new Dell YCRD7 360W Power Supply for Dell 7060 5060 7080MT G5-5090

YCRD7 360W Power Supply Fit Dell Optiplex 3050 7050 7060 3050MT, enjoys 6 Months Warranty,30-Day Money Back!

Dell YCRD7 Power Supply

New YCRD7 - 360W Power Supply for OptiPlex 7080 MT G5 5090 XE3 XPS 8940.All power supplies are tested by our in house technicians and they are guaranteed to function properly.

  • Model Number:YCRD7
  • Condition: New
  • Connectors: 6+4+4+6
  • Wattage: 360 WATT
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For Dell
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
360W Power Supply for Dell OptiPlex 7080 MT G5 5090 XE3 XPS 8940

MAX. OUTPUT POWER: 360W

AC INPUT
100-240V~/5.0A 50/60Hz

DC OUTPUT
+12VA2 == /18A MAX
+12VA1DC == /18A MAX
+12VCDC ==/12A MAX
+12VBDC ==/18A MAX
(+12VA1DC) + (+12VA2DC) == /18A MAX

Dimensions
83mm x 63mm x 220mm

Connectors
Connector: 6+4+4+6 pins

Part Number:
YCRD7 / HU360EBM-00 / L360EBM-00 / 2VD0G / 66HDY

Compatible Models
For Dell Optiplex 3050 7050 3668 MT ,Dell 7060 5060 7080MT G5-50905K7J8



HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new dell YCRD7 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.