Home :: For Dell Power Supply :: For Dell D685EF-01 Power Supply

Brand new D685EF-01 685W Power Supply For Dell Precision T5810 T7810 T7910 Workstation

Dell T5810 T7810 power supply 685w D685EF-01 0CYP9P, enjoys 6 Months Warranty,30-Day Money Back!

For Dell D685EF-01 Power Supply

Brand new D685EF-01 685W Switching Power Supply for Dell Precision T7810 T5810 T5610 D685EF-01. All power supplies are tested by our in house technicians and they are guaranteed to function properly.

  • Model: D685EF-01
  • For Dell Precision T5810
  • Wattage: 685 WATT
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For Dell
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.

Power Supply 685W D685EF-01 F685EF-01 DPS-685AB-2 A 0VDY4N 0CYP9P for DELL T5810 T7810 Switching Power VDY4N CYP9P
Max Power: 685W
Model Number: D685EF-01, CYP9P, VDY4N, 0VDY4N ,F685EF-01
Ref No: DPS-685AB-1 A，DPS-685AB-2 A
interface type: 24pin
Compatible Models: for Dell Precision T5810 T7810 T7910


HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new dell D685EF-01 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.