Home :: Dell Power Supply :: Dell AC200EPS-00 Power Supply

Brand new AC200EPS-00 Dell 200 Watts Power Supply PSU For OptiPlex 3080 5080 7080 SFF

PSU for 3080 5080 7080 5090 7090 SFF 200W Power Supply 6+4+4 Pin 05NDCM 0K92TW H200EPS-01 H200EBS-01 AC200EBS-01 L200EBS-01 AC200EPS-00 , enjoys 6 Months Warranty,30-Day Money Back!

Dell AC200EPS-00 Power Supply

Brand new AC200EPS-00 200W Power Supply for OptiPlex 3080 5080 7080 SFF.All power supplies are tested by our in house technicians and they are guaranteed to function properly.

  • Part Number: AC200EPS-00
  • Connectors:
    6+4+4 Pin
  • Wattage: 200 WATT
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For Dell
  • Certification:CE FCC ROHS

Product Details

The Dell 5NDCM AC200EPS-00 Power Supply is a reliable and efficient power solution designed for Dell OptiPlex 3060, 3080, and 3470 Small Form Factor systems.

AC INPUT
100-240V ~ / 3.2A 50-60 Hz
DC OUTPUT
+12VA1 = /16.5A
+12VA2 = /16.5A
+12VB = /14.0A
Dimensions
62mm x 82mm x 220mm

Model Number : H200EPS-01, H200EBS-01, AC200EBS-01, L200EBS-01, AC200EPS-00 ,5NDCM

Compatible Models (not limited to)
OptiPlex 3080 SFF
OptiPlex 5080 SFF
OptiPlex 7080 SFF


HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new dell AC200EPS-00 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.