Home :: For Advantech Power Supply :: For Advantech FSP400-60PFG Power Supply

New For Advantech FSP400-60PFG 400W Power Supply

New For Advantech Industrial Control Power 400W FSP400-60PFG., enjoys 6 Months Warranty,30-Day Money Back!

Advantech FSP400-60PFG Power Supply

FSP400-60PFG FSP 400W ATX12V Power Supply. .All power supplies are tested by our in house technicians and they are guaranteed to function properly.

  • Part Number: FSP400-60PFG
  • Interface Type： 24Pin
  • Wattage: 300 WATT
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For FPS
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.

FSP400-60PFG advantech 96PS-A400wPS2 1757004407-01
FSP FSP400-60PFB FSP400-60PFG FSP460-70PFL REPLACEMENT POWER SUPPLY
AC Input :
100-240V 50-60HZ 6-3A
DC Output :
+3.3V 21.0A
+5V 20.0A
+12V1 16.0A
+12V2 16.0A
+5VSB 3.0A
-12V 0.5A
-5V 0.3A
Rating Power： 301W – 400W
Model Number： FSP400-60PFG
Package： Yes
Application： Desktop
Interface Type： 24Pin
PFC Type： Active
CPU Power Connector： 4 pin
Modular： Non-Modular


HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new Advantech FSP400-60PFG Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.