Advantech power supply
Advantech power supply
Advantech/FSP FSP350-50FCB is a 350W 1U switching power supply designed for industrial applications, particularly in servers, workstations, and automation equipment. .All power supplies are tested by our in house technicians and they are guaranteed to function properly.
Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
FSP350-50FCB is an industrial level of switching power supply. the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use.
Power Output: 350 Watts.
Graphics Card 12V Pin Number:
8 pin +2 x6 pin
CPU Power Connector:
4 pin
Application:
Server
Interface Type:
20 + 4Pin
Form Factor: 1U (designed for rackmount systems).
Type: Switching power supply, utilizing active PFC (Power Factor Correction).
Industrial Grade: Built to withstand the rigors of industrial environments.
Applications: Suitable for servers, workstations, communication systems, and other automation applications.
Reliability: Designed for high reliability and performance.
Overload Protection: Includes over current, over temperature, and over voltage protection.
1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.
2. Install the new Advantech FSP350-50FCB Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)
3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.
©2012-2025. www.laptopadaptershop.com.au All offers and prices are subject to change without prior notice.Designated trademarks and brands are the property of their respective owners.
